Desincrustante enérgico.

Detercal 1N

Detercal 1N, Desincrustante enérgico.

Español

Detergente ácido con elevado poder humectante y penetrante. Elimina rápida y eficazmente las incrustaciones y los depósitos calcáreos. Su poder desengrasante lo hace especialmente útil en instalaciones con óxido e incrustaciones con grasas adheridas. Contiene inhibidores de corrosión para metales ferrosos.

Dosis y forma de empleo
Se aplica por inmersión diluido entre un 15 y 20 % según la incrustación. Se debe aclarar inmediatamente con abundante agua. Si la limpieza es por circulación, la dosis de empleo es de 5 al 10 %, y conviene utilizar un producto antiespumante.
Datos técnicos
Aspecto: Líquido marrón transparente.
pH (1%): 1.5 +/- 0.5
Densidad (20ºC): 1.075 +/- 0.01 g/ml
Componentes principales
Contiene tensioactivos no iónicos < 5 %, perfumes < 5 %. Ácido clorhídrico.
Presentación
22 kg.
Precauciones de utilización o manipulación
NO INGERIR
H290 Puede ser corrosivo para los metales.
H319 Provoca irritación ocular grave.
H335 Puede irritar las vías respiratorias.
H315 Provoca irritación cutánea.
P102 Mantener fuera del alcance de los niños.
P280F Llevar guantes, prendas y gafas de protección. En caso de ventilación insuficiente, llevar equipo de protección respiratoria.
P303+P361+P353 EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente todas las prendas contaminadas. Aclararse la piel con agua o ducharse.
P304+P340 EN CASO DE INHALACIÓN: Transportar a la persona al aire libre y mantenerla en una posición que le facilite la respiración.
P305+P351+P338 EN CASO DE CONTACTO CON LOS OJOS: Aclarar cuidadosamente con agua durante varios minutos. Quitar las lentes de contacto, si lleva y resulta fácil. Seguir aclarando.
P501b Eliminar el contenido/el recipiente en un punto de recogida pública de residuos especiales o peligrosos.
No mezclar con otros productos químicos.
Revisión:
10
Fecha:
15/04/2015

English

Acidic cleaner with high wetting and penetrating power. Quickly and effectively eliminates scale deposits. Its degreasing power makes it especially useful in installations with rust and scaling with adhered grease. Contains corrosion inhibitors for ferrous metals.

Dosage and use instructions
Used by immersion, diluted at 15-20%, depending on the degree of scaling. Rinse immediately with plenty of water. If the cleaning is by circulation, doses from 5 to 10%, an antifoam agent should be used.
Technical data
Appearance: Transparent brown liquid.
pH (1%): 1.5 +/- 0.5
Density (20ºC): 1.075 +/- 0.01 g/ml
Main components
Contains non-ionic surfactants < 5 %, perfumes < 5 %. Hydrochloric acid.
Presentation
22 kg.
Use or handling precautions
DO NOT SWALLOW
H290 May be corrosive to metals.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H315 Causes skin irritation.
P102 Keep out of reach of children.
P280F Wear protective gloves, clothing and eye protection. In case of inadequate ventilation wear respiratory protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501b Dispose of contents/container to hazardous or special waste collection point.
Do not mix with other chemichals.
Review:
10
Date:
15/04/2015