Desatascador químico

Tulim

Tulim, Desatascador químico

Español

Enérgico desatascador con gran poder deshidratante. Disuelve con gran facilidad materia orgánica celulosa, incrustaciones…


Dosis y forma de empleo
Se emplea puro. Se vierte lentamente en el interior de la cañería o desagüe y se deja actuar de 5 a 10 min., dependiendo del nivel de atascamiento. Se aclara con abundante agua. Rendimiento: 200 - 800 ml por desagüe, 1.5 - 2 l en caso de atascos difíciles. ATENCIÓN: Tomar todas las precauciones posibles. No añadir nunca agua sobre el producto puro.
Datos técnicos
Aspecto: Líquido viscoso.
pH (1%): 1.0 +/- 0.5
Componentes principales
Contiene ácido sulfúrico 96% (EC No. 231-639-5).
Presentación
12x1 l.
Precauciones de utilización o manipulación
NO INGERIR
H314 Provoca quemaduras graves en la piel y lesiones oculares graves.
P102-P405 Mantener fuera del alcance de los niños. Guardar bajo llave.
P280C Llevar guantes, prendas y gafas de protección.
P363 Lavar las prendas contaminadas antes de volver a usarlas.
P301+P330+P331 EN CASO DE INGESTIÓN: Enjuagarse la boca. NO provocar el vómito.
P303+P361+P353 EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente todas las prendas contaminadas. Aclararse la piel con agua o ducharse.
P304+P340 EN CASO DE INHALACIÓN: Transportar a la persona al aire libre y mantenerla en una posición que le facilite la respiración.
P305+P351+P338 EN CASO DE CONTACTO CON LOS OJOS: Aclarar cuidadosamente con agua durante varios minutos. Quitar las lentes de contacto, si lleva y resulta fácil. Seguir aclarando.
P310 Llamar inmediatamente a un CENTRO DE TOXICOLOGÍA o a un médico.
P321 Se necesita un tratamiento específico.
P501b Eliminar el contenido/el recipiente en un punto de recogida pública de residuos especiales o peligrosos.
No mezclar con otros productos químicos.
Revisión:
7
Fecha:
29/08/2023

English

High-strength drain clearer with high dehydrating power. Easily dissolves organic matter cellulose, scale, etc.
FOR PROFESSIONAL USE ONLY

High-strength drain clearer with high dehydrating power. Easily dissolves organic matter cellulose, scale, etc.
FOR PROFESSIONAL USE ONLY

Dosage and use instructions
It is used pure, by pouring it slowly into the drain or pipe, and leaving it to act between 5 and 10 min. depending on the degree of blockage. Rinse with plenty of water. Performance: 200-800 ml per drain, 1,5 l-2 l in case of heavy blockages. WARNING: Take all the possible precautions. Do not add water to the product.
Technical data
Appearance: Viscous liquid.
pH (1%): 1.0 +/- 0.5
Main components
Contains sulphuric acid 96% (EC No. 231-639-5).
Presentation
12x1 l.
Use or handling precautions
DO NOT SWALLOW
H314 Causes severe skin burns and eye damage.
P102-P405 Keep out of reach of children. Store locked up.
P280C Wear protective gloves, clothing and eye protection.
P363 Wash contaminated clothing before reuse.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.
P321 Specific treatment.
P501b Dispose of contents/container to hazardous or special waste collection point.
Do not mix with other chemichals.
Review:
7
Date:
29/08/2023