High-strength degreasing cleaner
Griddgrass
High-strength degreasing cleaner
Griddgrass is a detergent with great degreasing and dispersing power. Especially recommended for cleaning kitchen plates, ovens and other very dirty surfaces with burnt fats. It can be used on all types of metals except aluminum.
Dosage and use instructions
It is used pure or diluted up to 10%, spraying on the surface to be treated at 50 - 60ºC. Let act for a few minutes and rinse with abundant water.
Technical data
Appearance: Transparent brown liquid.
pH (1%): 12.5 +/- 0.5
Density (20ºC): 1.28 +/- 0.02 g/ml
Main components
Contient phosphonates < 5 %, agents de surface non ioniques < 5 %. Sodium hydroxide, Sodium silicate, Potassium hydroxide, 2,2 ́-iminodiethanol.
Presentation
12kg, 4x6kg 15x1kg.
Use or handling precautions
DO NOT SWALLOW
H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.
P102 Keep out of reach of children.
P280F Wear protective gloves, clothing and eye protection. In case of inadequate ventilation wear respiratory protection.
P363 Wash contaminated clothing before reuse.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.
P321 Specific treatment.
P501b Dispose of contents/container to hazardous or special waste collection point.
Do not mix with other chemichals.
Review:
2
Date:
07/03/2024
Griddgrass es un limpiador desengrasante enérgico de uso profesional, formulado con gran poder desengrasante y dispersante para eliminar grasas requemadas e incrustaciones en superficies de cocina. Sin EDTA, sin NTA, sin amoniaco, sin cloro, sin fosfatos, sin alcohol, sin perfume y sin colorantes artificiales. Apto sobre todo tipo de metales, excepto aluminio.
Aplicar puro o diluido hasta el 10 % sobre la superficie a tratar, preferentemente a una temperatura de entre 50 °C y 60 °C. Pulverizar directamente sobre la zona sucia, dejar actuar unos minutos y aclarar con abundante agua. En caso de suciedad muy resistente, repetir la operación o aumentar la concentración. No usar sobre aluminio.
| Aspecto | Líquido marrón transparente |
| pH (1 %) | 12,5 ± 0,5 |
| Densidad (20 °C) | 1,28 ± 0,02 g/ml |
| Uso recomendado | Puro o diluido hasta el 10 % · 50–60 °C |
| Presentación | 12 kg · 4×6 kg · 15×1 kg |
| Conservación | Entre 5 °C y 35 °C · evitar luz solar directa |
NO INGERIR. Producto corrosivo. No mezclar con otros productos químicos. No usar sobre aluminio.
Para información completa de manipulación, conservación y eliminación, solicitar la Ficha de Datos de Seguridad (FDS) a Instaquim.