Clor Active 15% is a liquid disinfectant suitable for the disinfection of water for public consumption, wastewater, water for irrigation and fire extinguishing, etc. It is also suitable for water conservation in cooling systems and industrial processes. It complies with the UNE-EN 901:2013 standard.
Clor Active 15% is a sodium hypochlorite solution with 15% active chlorine formulated for the disinfection of drinking water, wastewater and industrial treatment systems. As a high-concentration sodium hypochlorite, it provides broad-spectrum oxidizing and disinfecting action against bacteria, viruses and fungi, with reduced dosing and compliance with UNE-EN 901:2013 Standard for contact with drinking water.
0115% active chlorine concentration — higher yield per litre and reduced dosing volume compared to conventional solutions.
02Compliant with UNE-EN 901:2013 — suitable for drinking water treatment and public water supply networks.
03Phosphate-free, EDTA-free, NTA-free, ammonia-free, no artificial dyes, fragrance-free and no caustic soda — clean formula for applications in food circuits and drinking water.
04Compatible with CIP systems — valid for cleaning and disinfection in closed-circuit systems in food industry and pharmaceutical sector.
05Effective control of biofilm and Legionella — the oxidizing action of residual chlorine keeps networks and circuits free of microbiological deposits.
Request commercial or technical informationWe respond to queries within 24 working hours.
Clor Active 15% is a high-concentration sodium hypochlorite formulated specifically for professional applications where microbiological control of water and surfaces is a critical requirement. Its 15% active chlorine concentration allows working with reduced dosing volumes, optimizing yield per tank, reducing replenishment frequency and facilitating logistical management in drinking water treatment installations, food industry, healthcare and industrial maintenance.
Manufactured by Detervic / Instaquim, Clor Active 15% is formulated without additives restricted by European detergent and biocide regulations—no phosphates, no EDTA, no NTA, no ammonia, no alcohol, no artificial dyes, no fragrance and no caustic soda—and complies with UNE-EN 901:2013 Standard, which regulates the requirements for chemical products used in the treatment of drinking water.
Product summary
Product type
Chlorinated disinfectant — sodium hypochlorite with 15% active chlorine
Main use
Disinfection of drinking water, wastewater treatment, CIP cleaning, microbiological control in industrial circuits
Sectors
Water treatment, food industry, HoReCa, healthcare, industrial maintenance
Compatibility
Stainless steel, CIP circuits, automatic dosing systems; verify compatibility with materials sensitive to chlorine
Application
Dosing in automatic systems, dilution in water, general and vertical spray, CIP cleaning
High concentration, reduced dosing — The 15% active chlorine allows reducing the product volume dosed per cycle, optimizing yield per tank and replenishment frequency in treatment plants and industrial systems.
Formula without restricted additives — No phosphates, no EDTA and no NTA, complying with European detergent and biocide regulations. No ammonia, no alcohol, no artificial dyes and no fragrance: suitable for drinking water applications and food circuits.
Compliance with UNE-EN 901:2013 — Certified for use in drinking water treatment, guaranteeing compliance with current health and safety regulatory requirements.
Compatible with CIP systems — Suitable for cleaning and disinfection in closed-circuit systems (Clean-In-Place) in food industry, beverages and pharmaceutical sector, ensuring safety of food-contact surfaces.
Biofilm prevention and Legionella control — The oxidizing action of residual chlorine keeps distribution networks, cooling towers and industrial circuits free of microbiological deposits, algae and pathogens such as Legionella pneumophila.
Main applications
Drinking water treatment: dosing in water treatment plants and public supply networks to guarantee residual chlorine required by health regulations (RD 140/2003 and related standards). Eliminates pathogens and organic matter throughout the distribution chain.
CIP cleaning in food industry: disinfection of circuits, tanks, pipes and equipment through Clean-In-Place systems. Ensures safety of surfaces in direct contact with food and beverages.
Industrial water and cooling towers: microbiological control in industrial water circuits, cooling towers and thermal exchange systems where Legionella and other microorganism proliferation poses a health and operational risk.
Dilution on floors and general/vertical spray: applied in dilution for cleaning and disinfection of floors, horizontal surfaces and walls in industrial, healthcare and service environments.
Recommended sectors
HoReCa — disinfection of water tanks, refrigeration circuits, ice systems and surfaces in kitchens using dilution or general spray.
Food industry and beverages — CIP cleaning of equipment and circuits, disinfection of process water and microbiological control in production lines.
Healthcare and geriatric care — treatment of sanitary water and surface disinfection in environments where microbiological control is critical, especially against pathogens such as Legionella.
Determine the application and dosage: for drinking water treatment, follow the instructions of the responsible technician and applicable health regulations. For CIP, spray and floor dilution, calculate the final concentration required according to use protocol.
02
Prepare the dilution: always dilute the product in water before application. Add product to water, never the reverse. Use appropriate personal protective equipment: chemical-resistant gloves and safety glasses.
03
Apply using the appropriate system: in automatic dosing systems (treatment plants, CIP), use calibrated dosing pumps. In manual applications (spray, bucket dilution), take extreme personal protection precautions.
04
Observe contact time: allow sufficient time for the disinfecting action on target microorganisms. In drinking water, verify residual chlorine with kit or analyzer after dosing.
05
Storage: keep in a cool, dry and ventilated location, away from acids, oxidizers and heat sources. Keep container closed. Check expiration date and consult the safety data sheet before use.
Specific dilutions, contact times and recommendations are available in the product technical data sheet.
Specialized product versus generic alternative
Aspect
Clor Active 15%
Generic product
Application
Specific for drinking water treatment, CIP, industrial microbiological control and surface disinfection
More general use, no guarantee of suitability for specific regulations
Concentration
15% active chlorine, with higher yield per litre
Typically 5–12%, larger volume per equivalent dose
Reseller or brand without direct technical support
Channel adaptation
Distributor pricing and professional formats
Frequently retail format without channel pricing
Frequently asked questions
What is Clor Active 15% used for?
It is a sodium hypochlorite solution with 15% active chlorine for disinfection of drinking water, wastewater, CIP systems in food industry, microbiological control in cooling towers and industrial circuits, and cleaning and disinfection of floors and surfaces in professional environments.
What sectors is it recommended for?
Primarily in drinking water treatment and supply networks, food and beverage industry, HoReCa, healthcare and geriatric care, and service companies and facility management where microbiological control of water and surfaces is an operational or regulatory requirement.
Is it suitable for professional use?
Yes. Formulated by Detervic / Instaquim for professional environments, with technical support for distributors and authorized users. Complies with UNE-EN 901:2013 Standard for drinking water.
Where can I find the technical data sheet?
Available on this page. For specific dilutions, contact times or detailed operational information, consult the complete technical document.
Is the safety data sheet available?
Yes. The safety data sheet (SDS) is available for authorized customers and distributors upon request to the commercial department.
How can I request a quote or pricing?
Contact the commercial team via form, WhatsApp or telephone. We respond to queries within 24 working hours.
