Detergente desincrustante espumante concentrado
Acid Foam Pro
Detergente desincrustante espumante concentrado
Detergente concentrado para la eliminación de incrustaciones calcáreas producidas por la dureza del agua y por las limpiezas alcalinas. Indicado para la limpieza de paredes, suelos, maquinaria, e instalaciones diversas en la industria alimentaria. No ataca al aluminio ni al acero inoxidable.
Dosis y forma de empleo
Se utiliza diluido en agua a entre 2 y 5 %, en función del grado de suciedad y de la cantidad de cal a eliminar, a una temperatura entre 20 – 60°C. Se deja actuar unos minutos y se aclara con agua a presión. Se puede aplicar por pulverización con equipos de proyección de espuma, inmersión o manualmente.
Datos técnicos
Aspecto: Líquido incolor transparente.
pH (1%): 2.0 +/- 0.5
Densidad (20ºC): 1.21 +/- 0.01 g/ml
Componentes principales
Contiene tensioactivos no iónicos < 5 %. Ácido ortofosfórico.
Presentación
24 kg, 1200 kg.
Precauciones de utilización o manipulación
NO INGERIR
H290 Puede ser corrosivo para los metales.
H314 Provoca quemaduras graves en la piel y lesiones oculares graves.
P102 Mantener fuera del alcance de los niños.
P280C Llevar guantes, prendas y gafas de protección.
P363 Lavar las prendas contaminadas antes de volver a usarlas.
P301+P330+P331 EN CASO DE INGESTIÓN: Enjuagarse la boca. NO provocar el vómito.
P303+P361+P353 EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente todas las prendas contaminadas. Aclararse la piel con agua o ducharse.
P304+P340 EN CASO DE INHALACIÓN: Transportar a la persona al aire libre y mantenerla en una posición que le facilite la respiración.
P305+P351+P338 EN CASO DE CONTACTO CON LOS OJOS: Aclarar cuidadosamente con agua durante varios minutos. Quitar las lentes de contacto, si lleva y resulta fácil. Seguir aclarando.
P501b Eliminar el contenido/el recipiente en un punto de recogida pública de residuos especiales o peligrosos.
No mezclar con otros productos químicos.
Revisión:
1
Fecha:
13/02/2017
Acid Foam Pro, our cutting-edge concentrated solution designed to effectively remove limescale deposits caused by water hardness and alkaline cleaning. This powerful detergent is specially formulated to tackle cleaning challenges in the food industry, including walls, floors, machinery, and various facilities.
Key Features:
1. Concentrated Effectiveness: Acid Foam Pro offers highly concentrated action, ensuring the effective elimination of limescale deposits and restoring clarity and cleanliness to affected surfaces.
2. Wide Range of Applications: This product stands out as the ideal choice to ensure hygiene in the food industry, where cleanliness is essential. Trust its effectiveness on a wide variety of critical surfaces.
3. Total Compatibility: Unlike other products, Acid Foam Pro is safe for use on aluminum and stainless steel, giving you the peace of mind that you can apply it to a variety of materials without concerns.
4. Application Versatility: Acid Foam Pro adapts to your needs. You can use it diluted in water at 2-5%, at temperatures between 20-60°C. It can be applied through spraying with foam projection equipment, immersion, or manually.
Usage Instructions:
1. Dilute Acid Foam Pro in water following the instructions according to the level of dirt and the amount of limescale to remove.
2. Apply the solution to the affected areas and allow the product to act for a few minutes.
3. Rinse with high-pressure water to reveal clean and limescale-free surfaces.
Acid Foam Pro is more than just a detergent; it's your reliable solution for maintaining food industry facilities in optimal hygiene conditions. Facilitate the removal of limescale deposits and enjoy clean and shiny surfaces with Acid Foam Pro. Achieve cleaning excellence that only this product can offer!
Concentrated detergent for the elimination of scale deposits caused by hard water and alkali cleanings. Suitable for thorough cleaning of walls, floors, machinery and various installations in the food industry in general. Does not attack aluminium or stainless steel.
Dosage and use instructions
It is used diluted in water at 2 - 5 %, depending on the degree of dirt and scaling to be removed, at 20 - 60°C. Let work for a few minutes and rinse with plenty of water afterwards. It can be applied by spraying with foam projection equipment, by immersion or manually.
Technical data
Appearance: Transparent colourless liquid.
pH (1%): 2.0 +/- 0.5
Density (20ºC): 1.21 +/- 0.01 g/ml
Main components
Contains non-ionic surfactants < 5 %. Orthophosphoric acid.
Presentation
24 kg, 1200 kg.
Use or handling precautions
DO NOT SWALLOW
H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.
P102 Keep out of reach of children.
P280C Wear protective gloves, clothing and eye protection.
P363 Wash contaminated clothing before reuse.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501b Dispose of contents/container to hazardous or special waste collection point.
Do not mix with other chemichals.
Review:
1
Date:
13/02/2017