Pulimento para suelos de madera.

Brima

Brima, Pulimento para suelos de madera.

Español

Pulimento concentrado de máximas prestaciones para suelos de madera tratada, especialmente parqué. Autobrillante y antideslizante, con gran resistencia al rayado por tráfico humano y al lavado con agua y detergentes.

Dosis y forma de empleo
Se aplica concentrado. Primero se limpia la superficie a tratar con una bayeta humedecida. Una vez seca, se aplica el producto dejando una película uniforme. Se aconseja utilizar un aplicador o una bayeta, nunca una mopa o una gamuza. Se deja secar unos 20 - 30 minutos y se aplica una segunda capa. Si la superficie está deteriorada o se desea más brillo, puede aplicarse una tercera capa.
Datos técnicos
Aspecto: Líquido opaco beige.
pH: 9.0 +/- 0.5
Componentes principales
Contiene tensioactivos no iónicos < 5 %. Ftalato de dibutilo.
Presentación
10 kg.
Precauciones de utilización o manipulación
NO INGERIR
H360D Puede dañar al feto.
P102 Mantener fuera del alcance de los niños.
P201-P202 Pedir instrucciones especiales antes del uso. No manipular la sustancia antes de haber leído y comprendido todas las instrucciones de seguridad.
P262 Evitar el contacto con los ojos, la piel o la ropa.
P308+P313 EN CASO DE exposición manifiesta o presunta: Consultar a un médico.
P501a Eliminar el contenido/el recipiente con todas las precauciones posibles.
No mezclar con otros productos químicos.
Revisión:
8
Fecha:
22/12/2014

English

It is a concentrated polish with maximum performance specially designed for the care and maintenance of treated wood floors, in particular parquet. This product is perfect for giving your floors a self-shining and non-slip finish, with great resistance to scratching by human traffic and to washing with water and detergents.

The application is very simple and the dosage is concentrated. Before applying the product, it is important that the surface is clean, so it is recommended to clean it with a damp cloth. Once dry, it is applied leaving a uniform film. An applicator or a cloth can be used for the application, but never a mop or a chamois. Allow the product to dry for 20-30 minutes and apply a second coat. If the surface is very deteriorated or a higher gloss is desired, a third coat can be applied.

It is a carefully formulated, high quality product. Its main components help to clean and dissolve dirt, and dibutyl phthalate, which helps to achieve a self-shining and anti-slip effect.

In addition, Brima comes in a 10 kg pack, which is perfect for use in homes, offices and other commercial spaces. With it, treated wooden floors will look as good as new and will have a longer durability thanks to its resistance to scratching and washing.

It is a concentrated polish with maximum performance specially designed for the care and maintenance of treated wood floors, in particular parquet. This product is perfect for giving your floors a self-shining and non-slip finish, with great resistance to scratching by human traffic and to washing with water and detergents.

The application is very simple and the dosage is concentrated. Before applying the product, it is important that the surface is clean, so it is recommended to clean it with a damp cloth. Once dry, it is applied leaving a uniform film. An applicator or a cloth can be used for the application, but never a mop or a chamois. Allow the product to dry for 20-30 minutes and apply a second coat. If the surface is very deteriorated or a higher gloss is desired, a third coat can be applied.

It is a carefully formulated, high quality product. Its main components help to clean and dissolve dirt, and dibutyl phthalate, which helps to achieve a self-shining and anti-slip effect.

In addition, Brima comes in a 10 kg pack, which is perfect for use in homes, offices and other commercial spaces. With it, treated wooden floors will look as good as new and will have a longer durability thanks to its resistance to scratching and washing.

Dosage and use instructions
Apply concentrated. The surface to be treated is first cleaned with a wet dishcloth. Once dry, the product is applied leaving a uniform film. Using an applicator or discloth is recommended, never a mop or shammy. Let it dry for 20 - 30 minutes and apply a second layer. If applied on a damaged surface or if greater shine is required, a third layer can be applied.
Technical data
Appearance: Opaque beige liquid.
pH: 9.0 +/- 0.5
Main components
Contains non-ionic surfactants < 5 %. Dibutyl phthalate.
Presentation
10 kg.
Use or handling precautions
DO NOT SWALLOW
H360D May damage the unborn child.
P102 Keep out of reach of children.
P201-P202 Obtain special instructions before use. Do not handle until all safety precautions have been read and understood.
P262 Do not get in eyes, on skin, or on clothing.
P308+P313 IF exposed or concerned: Get medical attention.
P501a Dispose of contents/container in a safe way.
Do not mix with other chemichals.
Review:
8
Date:
22/12/2014