Desengrasante industrial en frío para uso profesional
Grassol es un limpiador desengrasante en frío de alta eficacia, formulado con una combinación equilibrada de álcalis, tensioactivos y disolventes. Sin fosfatos, sin EDTA, sin NTA, sin amoniaco, sin cloro y sin alcohol. Apto para uso puro o diluido sobre superficies sobreengrasadas en entornos de hostelería, cocinas industriales e instalaciones de producción.
Dilución en suelos (uso general): Diluir entre un 0,5 % y un 1 % en agua según el grado de suciedad. Aplicar sobre la superficie, frotar y aclarar con abundante agua.
Producto puro / pesada en caliente: Aplicar el producto sin diluir directamente sobre la zona a tratar. Dejar actuar unos minutos y aclarar con agua a presión. Compatible con máquina de alta presión.Spray sobre inox: Pulverizar sobre la superficie de acero inoxidable, frotar con paño o estropajo no abrasivo y aclarar con agua. No dejar secar el producto sobre la superficie.
| Aspecto | Líquido rosa transparente |
| pH (1 %) | 12,2 ± 0,5 |
| Densidad (20 °C) | 1,06 ± 0,02 g/ml |
| Uso sobre aluminio | No apto |
| Presentación | 20 kg · 10 kg · 4×5 kg · 15×1 kg |
| Conservación | Entre 5 °C y 35 °C · evitar luz solar directa |
NO INGERIR. Producto alcalino corrosivo. Usar siempre los equipos de protección individual indicados.
Compatible con depuradoras tras dilución reglamentaria. Apto para sistemas de tratamiento de aguas residuales cuando se utiliza según las dosis indicadas. Para información completa de manipulación, conservación y eliminación, solicitar la Ficha de Datos de Seguridad (FDS) a Instaquim.
Highly effective degreasing detergent. Its well balanced combination of alkalis, surfactants and solvents makes it suitable for numerous applications. Especially suitable for cleaning kitchen griddles, extractor hoods, floors, tiles, stainless steel and other very greasy surfaces. Can be used on all types of metal except aluminium.
Dosage and use instructions
It is used pure or diluted up to 1%, spraying onto the surface to be cleaned and rinsing with plenty of water. It can be used with high-pressure machines.
Technical data
Appearance: Transparent pink liquid.
pH (1%): 12.2 +/- 0.5
Density (20ºC): 1.06 +/- 0.02 g/ml
Main components
Contains phosphonates < 5 %, anionic surfactants < 5 %, non-ionic surfactants < 5 %. Sodium hydroxide.
Presentation
20 kg, 10kg, 4x5 kg, 15x1 kg.
Use or handling precautions
DO NOT SWALLOW
H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.
P102 Keep out of reach of children.
P280F Wear protective gloves, clothing and eye protection. In case of inadequate ventilation wear respiratory protection.
P363 Wash contaminated clothing before reuse.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.
P321 Specific treatment.
P501b Dispose of contents/container to hazardous or special waste collection point.
Do not mix with other chemichals.
Review:
12
Date:
27/03/2023