Limpiador ácido de sanitarios concentrado

IQ-H/1

IQ-H/1, Limpiador ácido de sanitarios concentrado

Español

Detergente ácido para lavabos, sanitarios, grifos, mamparas, paredes, suelos, acero inoxidable, etc. Limpia profundamente sin dejar residuos y mantiene las superficies brillantes. Atención: no usar sobre mármol ni bañeras esmaltadas.

Dosis y forma de empleo
De cada litro de concentrado se obtienen 5 litros de limpiador de sanitarios, mediante sistemas de dilución INSTAQUIM. Se utiliza puro o diluido en agua a entre 2.5 y 5 %, en función del grado de suciedad y de la cantidad de cal a eliminar. Si se utiliza puro se debe aclarar con abundante agua.
Datos técnicos
Aspecto: Líquido rojo transparente.
pH (1%): 2.2 +/- 0.5
Densidad (20ºC): 1.09 +/- 0.01 g/ml
Componentes principales
Contiene tensioactivos aniónicos < 5 %, tensioactivos no iónicos < 5 %. Contiene ácido ortofosfórico, ácidos 4-C10-C13-sec-alquilbencenosulfónicos.
Presentación
22 kg.
Precauciones de utilización o manipulación
NO INGERIR
H314 Provoca quemaduras graves en la piel y lesiones oculares graves.
P102 Mantener fuera del alcance de los niños.
P280 Llevar guantes, prendas y gafas de protección. En caso de ventilación insuficiente, llevar equipo de protección
respiratoria.
P363 Lavar las prendas contaminadas antes de volver a usarlas.
P301+P330+P331 EN CASO DE INGESTIÓN: Enjuagarse la boca. NO provocar el vómito.
P303+P361+P353 EN CASO DE CONTACTO CON LA PIEL (o el pelo): Quitar inmediatamente todas las prendas contaminadas. Aclararse la piel con agua o ducharse.
P305+P351+P338 EN CASO DE CONTACTO CON LOS OJOS: Aclarar cuidadosamente con agua durante varios minutos. Quitar las lentes de contacto, si lleva y resulta fácil. Seguir aclarando.
P501b Eliminar el contenido/el recipiente en un punto de recogida pública de residuos especiales o peligrosos.
No mezclar con otros productos químicos.
Revisión:
10
Fecha:
22/06/2023

English

Acidic cleaner for washbasins, sanitary fittings, taps, screens, walls, floors, stainless steel, etc. It cleans in depth without leaving traces, leaving the surfaces shiny. Warning: do not use on marble or enamelled baths.

Acidic cleaner for washbasins, sanitary fittings, taps, screens, walls, floors, stainless steel, etc. It cleans in depth without leaving traces, leaving the surfaces shiny. Warning: do not use on marble or enamelled baths.

Dosage and use instructions
5 litres of acidic cleaner are obtained of every litre of concentrate, using INSTAQUIM's dilution systems. It is used pure or diluted in water at 2.5 - 5 %, depending on the degree of dirt and the amount of lime to be removed. If it is used pure it must be rinsed with plenty of water.
Technical data
Appearance: Transparent red liquid.
pH (1%): 2.2 +/- 0.5
Density (20ºC): 1.09 +/- 0.01 g/ml
Main components
Contains anionic surfactants < 5 %, non-ionic surfactants < 5 %. Contains orthophosphoric acid, 4-C10-C13-sec-alkylbenzenesulphonic acids.
Presentation
22 kg.
Use or handling precautions
DO NOT SWALLOW
H314 Causes severe skin burns and eye damage.
P102 Keep out of reach of children.
P280 Wear protective gloves, clothing and eye protection. In case of inadequate ventilation wear respiratory protection.
P363 Wash contaminated clothing before reuse.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501b Dispose of contents/container to hazardous or special waste collection point.
Do not mix with other chemichals.
Review:
10
Date:
22/06/2023