Antipolvo mopa

Lustrin

Lustrin, Antipolvo mopa

Español

Producto formulado para quitar el polvo en cualquier tipo de superficie. Hace que la mopa capture el polvo y deje las superficies brillantes.

Dosis y forma de empleo
Pulverizar la mopa a unos 20 cm hasta su impregnación. Al cabo de unos minutos, puede efectuarse la captación de suciedad y abrillantado.
Datos técnicos
Aspecto: Aerosol.
Componentes principales
Contiene hidrocarburos alifáticos 5-15 %. Alcohol isopropílico, Decano, Hidrocarburos, C6, isoalcanos, <5% n-hexano.
Presentación
12x750 ml.
Precauciones de utilización o manipulación
NO INGERIR
H222 Aerosol extremadamente inflamable.
H229 Recipiente a presión: puede reventar si se calienta.
H319 Provoca irritación ocular grave.
H412 Nocivo para los organismos acuáticos, con efectos duraderos.
P102 Mantener fuera del alcance de los niños.
P210 Mantener alejado del calor, de superficies calientes, de chispas, de llamas abiertas y de cualquier otra fuente de ignición. No fumar.
P211 No pulverizar sobre una llama abierta u otra fuente de ignición.
P251 No perforar ni quemar, incluso después de su uso.
P280 Llevar guantes, prendas y gafas de protección. En caso de ventilación insuficiente, llevar equipo de protección respiratoria.
P305+P351+P338 EN CASO DE CONTACTO CON LOS OJOS: Enjuagar con agua cuidadosamente durante varios minutos. Quitar las lentes de contacto cuando estén presentes y pueda hacerse con facilidad. Proseguir con el lavado.
P337+P313 Si persiste la irritación ocular: Consultar a un médico.
P410+P412 Proteger de la luz del sol. No exponer a temperaturas superiores a 50ºC/122ºF.
P273-P501 Evitar su liberación al medio ambiente. Eliminar el contenido/el recipiente de conformidad con la normativa local.
No mezclar con otros productos químicos.
Revisión:
9
Fecha:
30/11/2023

English

Product formulated to remove dust from any type of surface. Makes the mop capture the dust and leave the surfaces shiny.

Product formulated to remove dust from any type of surface. Makes the mop capture the dust and leave the surfaces shiny.

Dosage and use instructions
Spray the mop from a distance of 20 cm until it is impregnated. After a few minutes, it is ready to start taking up dirt and polishing.
Technical data
Appearance: Aerosol.
Main components
Contains aliphatic hydrocarbons 5-15 %. Isopropyl alcohol, Decane, Hydrocarbons, C6, isoalkanes, <5% n-hexane.
Presentation
12x750 ml.
Use or handling precautions
DO NOT SWALLOW
H222 Extremely flammable aerosol.
H229 Pressurised container: may burst if heated.
H319 Causes serious eye irritation.
H412 Harmful to aquatic life with long lasting effects.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P280 Wear protective gloves, clothing and eye protection. In case of inadequate ventilation wear respiratory protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50ºC/122ºF.
P273-P501 Avoid release to the environment. Dispose of contents/container in accordance with local regulations.
Do not mix with other chemichals.
Review:
9
Date:
30/11/2023